Monthly Archives: December 2010

Designing a CNC Router

This entry is part 2 of 4 in the series Build Your Own CNC Router

The design I’ve chosen for my machine consists of a series of C-shaped components that house aluminum angle to which skateboard bearings are attached that roll along two lengths of black steel 3/4″ pipe. Continue reading

Posted in Shop Talk | Tagged , , , , , , | Leave a comment

Build Your Own CNC Router

This entry is part 1 of 4 in the series Build Your Own CNC Router

I have wanted a CNC Router since the day I saw a video on the internet of one in action. Today I finally made up my mind to venture out and build one for myself. Continue reading

Posted in Shop Talk | Tagged , , , , , , , | Leave a comment

How to Sharpen Drill Bits

There are several types of drill bits, each made to do a different job, so it’s important to select the right bit for the job. Even the right bit won’t help much if it is not sharp. Continue reading

Posted in Shop Talk | Tagged , , , , | 1 Comment

Circular Saw Repair

This morning I went into the shop to begin work on a new project. The air was cold and crisp, the temperature around 26 degrees, and the sun was shining brightly. I was inspired this morning to work on some … Continue reading

Posted in Home Repairs | Tagged , , , , , | Leave a comment

Creating the Ribbon for the 24″ Ribbon and Bow Shelf

This entry is part 3 of 5 in the series Building a 24" Ribbon and Bow Shelf

In this article, I will be walking you through the steps to layout and make the Ribbon for the shelf.
Continue reading

Posted in Wood Projects | Tagged , , , , , , , , , , , , | 1 Comment

Building the Supports for the 24″ Ribbon and Bow Shelf

This entry is part 2 of 5 in the series Building a 24" Ribbon and Bow Shelf

In this article, I’ll explain how to create the pattern and cut out the shelf support pieces for th 24″ Ribbon and Bow shelf. Continue reading

Posted in Wood Projects | Tagged , , , , , , , , , , | 1 Comment

How to Build a Ribbon and Bow Shelf

This entry is part 1 of 5 in the series Building a 24" Ribbon and Bow Shelf

In this series of articles, I will be describing in detail how to build this 24″ Ribbon and Bow Shelf. This shelf can be built out of any suitable wood that is capable of being stained or painted. Continue reading

Posted in Wood Projects | Tagged , , , , , , , , , , , , , , , , | Leave a comment

Welcome to MVB Crafts

In the coming months, we will posting article about woodworking, metalworking, cabinetry, carpentry, pottery, ceramics, glass, cloth, flowers, and a host of other subjects.
Continue reading

Posted in General | Tagged , , , , , , , , , | Leave a comment